Power Safety
Protect 8.33
Industrial High Power UPS
Protect 8.33
Uninterruptible Power Supplies
3-Phase Input; 3-Phase Output
160-500kVA
Engineering is our Business
UPS solutions engineered by AEG Power Solutions have been protecting oil & gas infrastructure, power stations and other industrial
installations for more than 60 years.
Protect 8. industrial Applications
Designed for all Industrial Applications
• Oil & Gas (Petrochemicals Offshore, Onshore, Pipelines)
Protect 8., the latest new generation of our Protect UPS
• Energy & Electricity generation (Power Generation, Transmission,
Distribution)
• Water (Desalination, Treatment)
• Instrumentation & Process Control (Chemicals, Mining, Steel, Paper)
product range.
It is designed to meet the toughest product customization
requirements:
• Specific mechanical protection degree
• Emergency Lighting
• Specific input & output voltage
• All Industrial Applications.
• Specific battery and autonomy Time
• Desired documentation.
Benefit also from a guaranteed short lead time, extremely
high electrical and mechanical robustness, high reliability
and a small footprint.
PERFECT IN FORM AND FUNCTION
Protect 8.33: Specification
Three Phase Output
MODEL
P8.33-160
160
P8.33-220
220
P8.33-330
330
P8.33-400
400
P8.33-500
500
NOMINAL RATING (AT COS 0.8 LAG)
IN KVA
RECTIFIER UNIT
Input nominal voltage
Input operating range (min/max)
Frequency
3
X
400 V (3
X
380 V, 3 415 V)
X
340 V–460 V
50/60 Hz 10%
Input current in A at nominal load
Charging characteristic to IEC 478-10
Nominal DC voltage
259
357
535
IU
384 V
649
811
Rectifier type
- Standard
- Optional
6 pulse
12 pulse
12 pulse
12 pulse
12 pulse
12 pulse
INVERTER UNIT
DC input
384 V 20%
Nominal AC voltage
3x 400 V (3 x 380 V, 3 x 415 V)
Output voltage static response
Output voltage dynamic response
Recovery time
<
<
2 ms
1%
2%
Frequency
50/60 Hz
0.1%
1% ( 2%, 3%)
0.0 lag to 0.0 lead
477
Frequency tolerance without mains
Frequency synchronisation range
Allowable load power factor
Output phase current in A
231
318
578
723
Voltage wave form
Voltage distortion
sinusoidal
<3%
Crest factor
max. 3
150%
125%
Overload response 1 min.
Overload response 10 mn.
Max short circuit current
> 3 x I nom
STATIC BYPASS SWITCH
AC voltage
Frequency
Nominal power in kVA
3
X
400 V (3
50/60 Hz
330
X
380 V, 3 415 V)
X
160
220
400
500
GENERAL DATA
Efficiency (AC to AC) – typical
Noise level depending on rating
EMC compatibility
Air cooling with redundant and monitored fans
Operating temperature range min./max.
(without de-rating)
Storage temperature range min./max.
Maximum altitude without de-rating
Protection degree IEC 529/EN 60529
standard system
up to 94% / >98% with ECO-Mode
up to 74dB(A)
EN 62040-2
Yes
–5°C / +40°C
–30°C / +75°C
1000 m
IP20, IP22 & IP43 (>IP43 engineered)
Equipment colour
RAL 7035
WEIGHTS AND DIMENSIONS
Height standard UPS (mm)
Height with max. options (mm)
Width (mm)
1910
2015
1800
960
1915
2210
2100
960
1915
2210
3300
960
1915
2210
3300
960
1915
2210
3300
960
Depth (mm)
Weight (kg)
2410
2900
3970
4380
4980
Batteries
Services
With over 60 years of expertise in power systems and
solutions, AEG Power Solutions is renowned for its
unparalleled services and technical support in critical
application environments. As the world class system
provider, you can rely on a global network of
AEG Power Solutions has considerable in-house
knowledge in battery technology and is able to offer
expert advice on the specifying, selection, operation
and testing of batteries. Our total system solutions
include a wide range of products using lead acid and
nickel-cadmium batteries in vented and gas recombination
technologies. Replacement batteries can be supplied
and installed by our Global Service Team.
20 Services Centers supported by over 150 field
engineers and more than 100 certified service partners
around the world. From the power solution selection
to your process installation and commissioning, our
certified experts go beyond your expectations by
offering service excellence that will ensure the lowest
operational cost for your mission-critical equipment.
The reliability of your installed power solution is
supported by a Global Service Team renowned for its
short response time and trouble shooting efficiency.
TM
Choosing one of the Pro Care Preventive
Maintenance Options gives you the ultimate peace
of mind reassuring complete cost control, security
and uninterrupted power supply in utmost critical
situations.
You can also benefit from a full range of professional
services that will protect and ensure the durability of
your investment and will take over when you need it
the most:
TM
Protect 8. Family Highlights
• The new generation of AEG Power Solution UPS
• More than 60 years experience in UPS business
summarized in Protect 8
• True on-line double conversion UPS (VFI SS 111)
• UPS designed for industrial applications
• Short lead time
• Pro Care Preventive Maintenance Options
• Turnkey solutions
• Installation & commissioning
• Maintenance services
• E-Service / remote monitoring
• 24/7 hotline
• Onsite training
• Hot swapping
• High robustness for harsh working environments
• Redundant controls for high reliability
• Small footprint
• High efficiency even at low output power
• Compatible with every type of battery
• Full digital control
• Onsite battery replacement
• Battery monitoring
• Facility and equipment management
• 24/7 global onsite contracts
• Power quality assessment
• Load bank & site capacity analysis
• Trouble shooting and repair.
• Top class communication platform.
AEG is a registered trademark used under license from AB Electrolux
For further information
please refer to our website:
PERFECT IN FORM AND FUNCTION
|