5-Port Fast Eth ern et
N-Way Sw itch
The 5-Port Fast Ethernet N-Way Switch provides you a flexible, reliable,
and affordable solution of the Ethernet network. It comes with five
independent 10/100Mbps ports. Each port delivers up to 200Mbps throughput,
and is able to operate in either half or full-duplex modes.
The 5-Port Fast Ethernet N-Way Switch also features N-Way (auto-negotiable), which automatically adjusts the device for
optimal operation; “Store-and-Forward” architecture filters to eliminate error packets and improve efficiency. Plus, based on
MDI/MDIX auto crossover technology, just use either a straight through or a crossover Ethernet cable, and you can get connected
with any other devices.
Features
* Complies with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX standards
* “Store and Forward” architecture filters
* IEEE 802.3x or Back Pressure (HDX) Flow Control
* 2K MAC Address table supported
* Five 10/100Mbps Auto-Detection ports
* 10/100Mbps auto-detection on Full or Half Duplex
* Power Feeding: +5Vdc/1.5A
* Each Ethernet port supports MDI/MDIX (auto crossover) capacity.
Specification
IEEE 802.3 10Base-T Ethernet
Standards
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE802.3x Flow Control
Protocol
CSMA/CD
Ports
Five 10/100Mbps RJ-45 Ports (support Auto-MDI/MDIX)
Store-and-Forward
Switching Scheme
Full Duplex: IEEE802.3x
Half Duplex: Back Pressure
Flow control
Cabling type
UTP Category 3 or better (10Base-T)
UTP Category 5 or better (100Base-TX)
10Mbps or 100Mbps (Half Duplex)
20Mbps or 200Mbps (Full Duplex)
Speed per port
MAC Address
2K
Power
Green
LED indicators
LINK/ACT
SPD
Green: on for successful connection, flashing for activity
Green: on for 100Mbps, off for 10Mbps
Physical Dimension
Weight
82 x 66 x 20 mm3 (Width x Depth x Height)
180g
Input power specifications DC 5V, 1.5V
Power Consumption
Agency and Regulatory
Operating Temperature
Operating Humidity
2.2W
FCC/CE/C-tick ClassB
0°C to 40°C
5~90% non-condensing
|