CP9180
USB Driver Installation Instructions
1. Plug the tool into an available USB Port, power the tool on, and put the
tool in program mode (See user manual for program mode instructions)
WINDOWS ME:
2. Open Windows “Control Panel” and *double-click* on the “System” icon
3. Click on “Device Manager” and proceed to step 4
WINDOWS XP:
2. *Right-click* on your My Computer icon and select Manage from the drop
down list
1
CP9180 – USB Driver Installation Instructions
5. Highlight the bullet next to Yes, this time only and click Next >
6. Highlight the bullet next to Install from a list or specific location
(advanced) and click Next >.
3
CP9180 – USB Driver Installation Instructions
7. Highlight the bullet next to Search for the best driver in these locations,
check the box next to Include this location in the search, and click
Browse
8. Browse for C:\Program Files\ScanningSuite\Actron\Drivers and click
OK.
4
CP9180 – USB Driver Installation Instructions
9. Ensure the correct location is in the text box and click Next >
10.The Windows New Hardware Wizard will begin searching for the USB
Cable Driver.
**If a warning appears stating the software you're installing has not passed windows logo testing
click Continue Anyway.
5
CP9180 – USB Driver Installation Instructions
11. When the files are done downloading click Finish
12.Your drivers are now installed and you can continue with Scanning Suite
operation.
2008 SPX. All rights reserved.
6
|