ADDONICS TECHNOLOGIES
Model: AEUDMACF, AEUDMACFWP (read-only)
ADDONICS TECHNOLOGIES
Model: AEUDMACF, AEUDMACFWP (read-only)
4-Pin Molex
4-Pin Molex
40-Pin IDE
Connector
40-Pin IDE
Connector
Power Connector
Power Connector
Power & drive
activity LED
Master or Slave
Setting
Power & drive
activity LED
Master or Slave
Setting
CF/MD Slot
CF/MD Slot
Step 1 Mount the IDE-CF Adapter PRO on a 3.5” drive bay.
Step 1 Mount the IDE-CF Adapter PRO on a 3.5” drive bay.
Step 2 Connect a 4-pin Molex power cable from the PC power supply to
Step 2 Connect a 4-pin Molex power cable from the PC power supply to
the 4-pin Molex power connector on the IDE-CF Adapter PRO.
the 4-pin Molex power connector on the IDE-CF Adapter PRO.
Step 3 By default, the IDE-CF Adapter PRO is set as a master device. Set
jumper on IDE Master mode or Slave mode (J5 ON = Master, J5 OFF =
Slave)
Step 3 By default, the IDE-CF Adapter PRO is set as a master device. Set
jumper on IDE Master mode or Slave mode (J5 ON = Master, J5 OFF =
Slave)
Step 4 Connect 40-pin IDE connector to IDE controller on motherboard
Step 4 Connect 40-pin IDE connector to IDE controller on motherboard
using IDE flat cable.
using IDE flat cable.
Note:
Note:
The IDE-CF Adapter PRO supports hot swap.
The IDE-CF Adapter PRO supports hot swap.
TECHNICAL SUPPORT (8:30 am to 6:00 pm PST)
TECHNICAL SUPPORT (8:30 am to 6:00 pm PST)
Phone:
Email:
408 453-6212
Phone:
Email:
408 453-6212
|