Electrical Safety, and Emission Statements
This product meets the following standards.
U.S. Federal Communications Commission
Electrical Safety, and Emission Statements
This product meets the following standards.
U.S. Federal Communications Commission
AT-G8BD-13/-14 Bidirectional GBIC
Transceivers Installation Guide
AT-G8BD-13/-14 Bidirectional GBIC
Transceivers Installation Guide
Radiated Energy
Radiated Energy
Note: This equipment has been tested and found to comply with the
limits for a Class A digital device pursuant to Part 15 of FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with this instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
Note: This equipment has been tested and found to comply with the
limits for a Class A digital device pursuant to Part 15 of FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with this instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
Overview
Overview
The AT-G8BD Series Bidirectional GBIC transceivers
provide Gigabit Ethernet connectivity over a single fiber
optic cable for Allied Telesyn networking products.
The AT-G8BD Series Bidirectional GBIC transceivers
provide Gigabit Ethernet connectivity over a single fiber
optic cable for Allied Telesyn networking products.
Note: Modifications or changes not expressly approved of by the
manufacturer or the FCC, can void your right to operate this
equipment.
Note: Modifications or changes not expressly approved of by the
manufacturer or the FCC, can void your right to operate this
equipment.
Industry Canada
Industry Canada
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences
du Règlement sur le matériel brouilleur du Canada.
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences
du Règlement sur le matériel brouilleur du Canada.
444
444
RFI Emissions
FCC Class A, EN55022 Class A, VCCI
Class A
RFI Emissions
FCC Class A, EN55022 Class A, VCCI
Class A
Warning: In a domestic environment this product may
cause radio interference in which case the user may be
required to take adequate measures.
Warning: In a domestic environment this product may
cause radio interference in which case the user may be
required to take adequate measures.
Type of Fiber
Optic Cable
Type of Fiber
Optic Cable
Model
TX
RX
Model
TX
RX
Immunity
EN 55022
Immunity
EN 55022
AT-G8BD-13
AT-G8BD-14
9 micron SMF
9 micron SMF
1310 nm
1490 nm
1490 nm
1310 nm
AT-G8BD-13
AT-G8BD-14
9 micron SMF
9 micron SMF
1310 nm
1490 nm
1490 nm
1310 nm
Electrical Safety UL 1950 (CULUS), EN 60950 (TUV),
Electrical Safety UL 1950 (CULUS), EN 60950 (TUV),
EN60825, CSA C22.2-No.950-95
EN60825, CSA C22.2-No.950-95
Both models feature a single SC connector.
Both models feature a single SC connector.
U.S. Pat. No. 6,939,058
U.S. Pat. No. 6,939,058
Note
Note
A transceiver must be connected to another
transceiver or fiber optic port that has compatible
operating characteristics. For instance, the
AT-G8BD-13 transceiver must be connected to an
AT-G8BD-14 transceiver or another optical interface
with operating characteristics compatible with the
AT-G8BD series transceivers.
A transceiver must be connected to another
transceiver or fiber optic port that has compatible
operating characteristics. For instance, the
AT-G8BD-13 transceiver must be connected to an
AT-G8BD-14 transceiver or another optical interface
with operating characteristics compatible with the
AT-G8BD series transceivers.
Copyright © 2005 Allied Telesyn, Inc. All rights reserved. No
part of this publication may be reproduced without prior
written permission from Allied Telesyn, Inc.
Copyright © 2005 Allied Telesyn, Inc. All rights reserved. No
part of this publication may be reproduced without prior
written permission from Allied Telesyn, Inc.
Laser
Laser
Class 1 laser product.
Class 1 laser product.
Laser
Laser
Do not stare into the laser beam.
Do not stare into the laser beam.
PN 613-50677-00 Rev. B
PN 613-50677-00 Rev. B
|