AT-WR4662n | High-Speed Mobility - Wireless Base Router
Quick Installation Guide | Wireless LAN
Software Configuration
Logging into the system
AT-WR4662n>enable
Password:
Please access the system facilities via SSH using any text-mode
SSH client software.
AT-WR4662n | High-Speed Mobility - Wireless Base Router
AT-WR4662n#configure terminal
Accessing the system via SSH
Enterconfigurationcommands, oneperline. End
The Secure Shell (SSH) is an encrypted networking protocol,
allowing user to configure the device through Ethernet network.
Microsoft does not supply SSH tool, you can use alternative
program such as Tera Term Pro, which is licensed under GPL2.
Acknowledgments
Contacting Allied Telesis
with CNTL/Z.
AT-WR4662n(config)#enable password [NEW
PASSWORD]
This product includes software developed by the University of
California, Berkeley and its contributors. Copyright ©1982,
1986, 1990, 1991, 1993 The Regents of the University of
California. All rights reserved.
Where to Find Web-based Guides
The installation and user guides for all Allied Telesis products
are available on “Documentation” section. You can view the
documents online or download them onto a local workstation
or server.
AT-WR4662n(config)#
The device is factory configured with the static IP address
192.168.1.1.
This product includes software licensed under the GNU
General Public License available on:
If the device is under a DHCP server, please check the assigned
IP address.
Input your preferred password in [NEW PASSWORD].
Online, Email and Telephone Support
The Command Line Interface (CLI)
Commands available for each protocol are separated into
several modes arranged in a hierarchy. The command prompt
shows the identity name of the router and the current menu
level, in example:
Source code for all GPL licensed software in this product can be
obtained from the Allied Telesis GPL Code Download Center
You can request technical support online by accessing the
“Support Center”. Our interactive support center is your link
to answers you need. Search our knowledge base, check
support tickets, learn about RMAs and contact technical
support.
When logging into the system via terminal console in SSH or
RS-232, you will be presented with the login prompt. Use
'manager' and password 'friend' for logging into the system
for the first time. Entered password is not visible, and the
backspace key is not valid.
Allied Telesis is committed to meeting the requirements of the
open source licenses including the GNU General Public License
(GPL) and will make all required source code available.
AT-WR4662n>
Warranty
If you would like a copy of the GPL source code contained in
Allied Telesis products, please send us a request by registered
mail including a check for US$15 to cover production and
shipping costs and a CD with the GPL code will be mailed to
you:
AT-WR4662n login: manager
AT-WR4662n#
For product registration and warranty conditions please visit
Allied Telesis website:
Password:
AT-WR4662n(config)#
AT-WR4662n(config-if)#
Returning Products
After logging into the router you will be presented with the
ATI™ banner and command prompt, in example:
GPL Code Request
Allied Telesis Labs (Ltd)
PO Box 8011
Products for return or repair must first be assigned a return
materials authorization (RMA) number. A product sent to
Allied Telesis without an RMA number will be returned to the
sender at the sender’s expense.
The list of available commands at any menu level can be
obtained by entering the question mark '?',
AA TTTTTTTTTTTTTTTTTT ooooo
AAAAA TTTTTTTTTTTTTTT oooooooo
Christchurch.
New Zealand
To obtain an RMA number, refer to “Replacement Services”
section.
AT-WR4662n>?
AAAAAAAA
TTTTTTTT
I oooooo
IIIIIIIIII
Clear
Debug
Reset functions
debugging functions
(see also ‘undebug’)
©2012 Allied Telesis Inc. All rights reserved.
AAAAAAAAAAA TTTTTTT
AAAAAAA AAAAA TTTT
Sales or Corporate Information
You can contact Allied Telesis for sales or corporate
IIIIIIIIII
This documentation is subject to change without notice. No
part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or any means electronic or
mechanical, including photocopying and recording for any
purpose other than the purchaser’s internal use without the
written permission of Allied Telesis, Inc.
AAAAAAA
AAAAA T
IIIIIIIIII
disable Turn off privileged mode command
enable Turn on privileged mode command
Management Software Updates
New releases of software for our managed products are
available on Allied Telesis web site:
Copyright(C)2012AlliedTelesisInternational
All Rights reserved.
AT-WR4662n>
exit
End current mode and down to previous
mode
help
Description of the interactive help
Tell Us What You Think
If you have any comments or suggestions on how we might
improve this or other Allied Telesis documents, please contact
Allied Telesis, AlliedWare Plus, EPSRing, SwitchBlade, and
VCStack are trademarks or registered trademarks in the United
States and elsewhere of Allied Telesis, Inc. Adobe, Acrobat, and
Reader are either registered trademarks or trademarks of
Adobe Systems Incorporated in the United States and/or other
countries. Additional brands, names and products mentioned
herein may be trademarks of their respective companies.
logout Exit from EXEC
no
quit
Negate a command or set its defaults
The password entering Privileged Exec Mode is still 'friend';
it can be changed with enable password [NEW
PASSWORD] command in Config Mode. Please perform the
following guide.
Exit current mode and down to previous
mode
show
Show command
terminal Set terminal line parameters
AT-WR4662n>
For further and more detailed information and for the full
command set, please refer to the AT-WR4600 Series manual;
Safety Notice
Do not open service or change any component.
Only qualified technicians are allowed to service the equipment.
Observe safety precautions to avoid electric shock.
Check voltage before connecting to the power supply.
Connecting to the wrong voltage will damage the equipment.
USA Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
European Headquarters | Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
© 2012 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their
respective owners.
613-001445 Rev.E
4
Allied Telesis
1
|