SD Card Adapter for miniSD™ card
Series
SCJC
Adapter for miniSD™ card connection with high reliability contact structure.
For
SD Memory
Card
For
miniSD™
Card
For
microSD™
Card
For
W-SIM
Features
Applications
For
Memory
Stick Micro™
●
●
●
●
General SD card hosts can be used by inserting miniSD™
card into the adaptor.
For digital still cameras, digital camcorders, mobile phones,
PCs and personal digital assistants
For
Memory
Stick™
Unique half-lock structure stops media from flying out
during ejection.
For portable memory players
Combine Type
Typical Specifications
Items
For
Compact
Flash™
Specifications
Applicable media
miniSD™ card
For PC cards
supporting
CardBus
Mounting type
Mounting style
Structure
For
Express
Card™
Media ejection
structure
Manual insertion/removal
For CMOS
Camera Module
Operating
temperature range
－25℃ to ＋85℃
Voltage proof
500V AC 1minute
Insulation resistance
Performance
1,000MΩ min.
100mΩ max.
10,000cycles
（Initial）
Contact resistance
（Initial）
Insertion and
removal cycle
Product Line
Media ejection structure
Packing system
Product No.
Manual insertion/removal
Tray
SCJC2A0200
18
SD Card Adapter for miniSD™ card
SCJC Series
Unit:mm
Dimensions
Style
For
SD Memory
Card
：
For
miniSD™
Card
For
microSD™
Card
For
W-SIM
For
Memory
Stick Micro™
For
Memory
Stick™
Combine Type
For
Compact
Flash™
For PC cards
supporting
CardBus
For
Express
Card™
Note
F Above dimensions apply when a miniSD™ card is fully inserted into the adapter case.
Indications on the label can be customized individually. For details, please contact us. Samples shall be shipped with
the standard label. Label applied in above diagram is Alps' standard label.
For CMOS
Camera Module
Cautions
1. This product has been designed and manufactured for use in ordinary electronic equipment, such as AV equipment,
electric home appliances, office machines and communication equipment. In case of using the products for highly
sensitive applications such as medical, aviation, aerospace and security, the set makers shall require to include
measures necessary to meet product safety requirements of such specific applications. Such measure may include
additional protection circuits and redundant circuits, for example.
2. To prevent contact failures caused by sulfuration or oxidation on the contact and terminal or deterioration of
solderability caused by film forming, please follow the instructions given below.
（1）Do not store the product in locations with high temperature or high humidity. Keep it in an atmosphere free from
corrosive gases including sulphurous or chlorinate gas. Do not stack.
（2）Store the adapter unopened at room temperature and low humidity. Use the product preferably within 3 months
after delivery or within 6 months at the latest.
（3）To store the product after opening the package, keep it in a sealed polyethylene bag. Store in a dark, cool place,
out of direct sunlight. Use the product as soon as possible.
19
|