TT-Record
Turntable Mp3 Recorder
"Fast, Easy, and Reliable"
USER INSTRUCTIONS
6122 S. Eastern Ave.
Los Angeles Ca. 90040
1/08
CONTENTS
ELECTRICAL SAFETY PRECAUTIONS..................................................................................................4
INSTALLATION gUIdLINES....................................................................................................................5
PROdUCT INFORMATION......................................................................................................................6
CUSTOMER SUPPORT..........................................................................................................................6
QUICK START.........................................................................................................................................7
ASSEMBLY.............................................................................................................................................8
SET-UP...................................................................................................................................................9
hEAdShELL ANd CARTRIdgE ASSEMBLY.........................................................................................9
PROPER TURNTABLE INSTALLATION................................................................................................11
TONEARMBALANCINg.......................................................................................................................11
ANTI-SKATE.........................................................................................................................................11
FUNCTIONS ANd CONTROLS
MAIN UNIT.................................................................................................................................12
TONEARM ASSEMBLY..............................................................................................................14
TROUBLE ShOOTINg..........................................................................................................................15
WARRANTY..........................................................................................................................................16
SPECIFICATIONS.................................................................................................................................17
CAUTION
Do not open -
risk of electric shock
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER.
THERE ARE NO USER SERVICEABLE PARTS
INSIDE. REFER ALL SERVICE TO YOUR
AUTHORIZED AMERICAN AUDIO® DEALER.
NOTE: This product satisfies FCC
regulations when shielded cables
and connectors are used to con-
nect the unit to other equipment.
To prevent electromagnetic inter-
ference with electrical appliances
such as radios and televisions, use
The lightning flash with an arrow triangular
symbol is intended to alert the user to the
presence of non insulated “dangerous volt-
age” within the products enclosure, and
may be of sufficient magnitude to constitute
a risk of electric shock.
shielded cables and connectors
The exclamation point triangular symbol is
for connections.
intended to alert the user to the presence
of important operating and maintenance
(servicing) instructions in the user manual
accompanying the amplifier.
©American Audio®
-
-
TT-Record™ Instruction Manual Page 3
ELECTRICAL SAFETY PRECAUTIONS
I. Heat - The turntable should be situated
away from heat sources such as radiators,
heat registers, stoves, or other appliances
(inclucing amplifliers) that produce heat.
2. Do not let insecticides, benzene, or thin-
ner come in contact with the surface of
the unit.
WARNING: TO PREVENT FIRE OR ELECTRIC
SHOCK HAZARD, DO NOT EXPOSE THIS
UNIT TO RAIN, LIQUIDS, OR MOISTURE
3. Never disassemble or modify your unit in
any way, doing so will void your manufac-
tures warranty.
4. Never plug this unit in to a dimmer pack
5. Do not attempt to operate this unit if it
becomes damaged in any way.
6. This unit is intended for indoor use only,
use of this product outdoors voids all war-
ranties.
7. Always mount this unit in safe and stable
matter.
CAUTION: TO PREVENT ELECTRIC SHOCK
DO NOT USE THIS (POLARIZED) PLUG WITH
AN EXTENSION CORD, RECEPTACLE, OR
OTHER TYPE OF ELECTRICAL OUTLET
UNLESS THE WIDE BLADES CAN BE
CAREFULLY INSERTED INTO A MATCHING
WIDE SLOT.
ATTENTION: POUR PREVENIR LES CHOCS
ELECTRIQUES NE PAS UTILISER CETTE
FICHE POLARISEE AVEC UN PROLON-
GATEUR, UNE PRISE DE COURANT OU
UNE AUTRE SORTIE DE COURANT, SAUF
SI LES LAMES PEUVENT ETRE INSEREES A
FOND SANS EN LAISSER AUCUNE PARTIE A
DECOUVERT.
8. Disconnect from main power before
making any type of connection.
9. Cleaning - The turntable should be clean-
ed only as recommended by the manufac-
turer. Use a soft cloth to wipe down
the outside of the unit. For stubborn stains
moisten a soft cloth with class cleaner or
other mild detergent to wipe away any
stains. Use a soft cloth to wipe any residual
cleaner. Never use volatile cleaners such
as benzene, solvent, or thinner to clean
your unit, these cleaners will damage the
units surface.
The serial and model number for this unit is
located on the rear panel. Please write down
the numbers here and retain for future refer-
ence.
Model No._____________________________
Serial No._____________________________
CAUTION:
1. Handle the power supply cord carefully. Do
not damage or deform; it may cause elec-
tric shock or malfunction when used. Hold
plug attachment when removing from wall
outlet. Do not pull on the cord.
2. To avoid electric shock, do not open the
top cover when the unit is plugged in. If
problems occur with the unit, call American
Audio® customer support.
Purchase Notes:
Date of Purchase_______________________
Dealer Name__________________________
Dealer Address_________________________
_________________________________________
_________________________________________
3. Do not place metal objects or spill liquid
inside or on the turntable. Electric shock
or malfunction may occur.
Dealer Phone__________________________
©American Audio®
-
-
TT-Record™ Instruction Manual Page 4
ELECTRICAL SAFETY PRECAUTIONS
ELECTRICAL PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product'senclosurethatmaybeofsufficientmagnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER (OR BACK).
THERE ARE NO USER SERVICEABLE PARTS
INSIDE REFER SERVICE TO YOUR AUTHORIZED
AMERICAN AUDIO® SERVICE TECHNICIAN.
IMPORTANT SAFETY INSTRUCTIONS
ObJECT AND LIQUID ENTRY - Never push objects of
READ INSTRUCTIONS — All the safety and operating
GROUNDING OR POLARIZATION
instructions should be read before the product is
operated.
•
Ifthisproductisequippedwithapolarizedalternating
current line plug (a plug having one blade wider than
theother), itwillfitintotheoutlet onlyoneway. This
isasafetyfeature.Ifyouareunabletoinserttheplug
fullyintotheoutlet, tryreversingtheplug. Iftheplug
should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
any kind into this product through openings as they
may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
RETAIN INSTRUCTIONS — The safety and operating
instructionsshouldberetainedforfuturereference.
hEED WARNINGS — All warnings on the product and
in the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS — All operating and use
instructions should be followed.
SERVICING — Do not attempt to service this product
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
CLEANING — The product should be cleaned only with
a polishing cloth or a soft dry cloth. Never clean with
furniture wax, benzine, insecticides or other volatile
liquids since they may corrode the cabinet.
•
If this product is equipped with
a
three-wire
DAMAGEREQUIRINGSERVICE - Unplugthisproduct
from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
groundingtypeplug,aplughavingathird(grounding)
pin, itwillonlyfitintoagroundingtypepoweroutlet.
Thisisasafetyfeature.Ifyouareunabletoinsertthe
plug into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the grounding type plug.
•
•
When the power-supply cord or plug is damaged.
If liquid has been spilled, or objects have fallen into
the product.
ATTAChMENTS
—
Do not use attachments not
recommendedbytheproductmanufacturerasthey
may cause hazards.
•
•
If the product has been exposed to rain or water.
Iftheproductdoesnotoperatenormallybyfollowing
theoperatinginstructions.Adjustonlythosecontrols
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its
normal operation.
WATER AND MOISTURE — Do not use this product
near water — for example, near a bathtub, wash
bowl,kitchensink,orlaundrytub;inawetbasement;
or near a swimming pool; and the like.
ACCESSORIES — Do not place this product on an
unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only
POWER-CORD PROTECTION - Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords at
plugs,conveniencereceptacles,andthepointwhere
they exit from the product.
OUTDOOR ANTENNA GROUNDING — If an outside
antennaorcablesystemisconnectedtotheproduct,
be sure the antenna or cable system is grounded so
astoprovidesomeprotectionagainstvoltagesurges
andbuilt-upstaticcharges.Article810oftheNational
ElectricalCode,ANSI/NFPA70,providesinformation
with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit,
connection to grounding electrodes, and
requirementsforthegroundingelectrode.SeeFigure
A.
LIGhTNING — For added protection for this product
duringalightningstorm,orwhenitisleftunattended
and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product
due to lightning and power-line surges.
POWER LINES —An outside antenna system should
notbelocatedinthevicinityofoverheadpowerlines
or other electric light or power circuits, or where it
can fall into such power lines or circuits. When
installing an outside antenna system, extreme care
should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
OVERLOADING — Do not overload wall outlets,
extensioncords,orintegralconveniencereceptacles
as this can result in a risk of fire or electric shock.
•
•
If the product has been dropped or damaged in any
way.
When the product exhibits a distinct change in
with
a
cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with
the product. Any mounting of the product should
follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the
manufacturer.
performance — this indicates a need for service.
REPLACEMENT PARTS -- When replacement parts
arerequired,besuretheservicetechnicianhasused
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorizedsubstitutionsmayresultinfire,electric
shock, or other hazards.
SAFETY ChECk - Upon completion of any service or
repairs to this product, ask the service technician to
performsafetycheckstodeterminethattheproduct
is in proper operating condition.
CART — A product and cart combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the product and cart
combination to overturn.
WALL OR CEILING MOUNTING — The product should
not be mounted to a wall or ceiling.
hEAT —The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce
heat.
VENTILATION — Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be
blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug,
or other similar surface. This product should not be
placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
POWER SOURCES —This product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of
power supply to your home, consult your product
dealer or local power company.
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
LOCATION – The appliance should be installed in a
stable location.
NONUSE PERIODS – The power cord of the appliance
should be unplugged from the outlet when left un-
used for a long period of time.
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Fig. A
NEC — NATIONAL ELECTRICAL CODE
©American Audio®
-
-
TT-Record™ Instruction Manual Page 5
PRODUCT INFORMATION
Customer Support: American Audio® pro-
vides a toll free customer support line, to pro-
vide set up help and to answer any question
should you encounter problems during your
set up or initial operation. You may also visit us
comments or suggestions. For service related
issue please contact American Audio®. Service
Hours are Monday through Friday 9:00 a.m. to
5:00 p.m. Pacific Standard Time.
Please carefully read and understand the
instructions in this manual thoroughly before
attempting to operate this unit. These instruc-
tions contain important safety information
regarding the use and maintenance of this unit.
Take special care to follow all warning symbols
and labels both on the unit and printed in this
manual. Also, Please keep this manual with the
unit, for future reference.
Voice:
Fax:
E-mail:
To purchase parts online visit
(800) 322-6337
(323) 582-2941
Features:
• Metal Tone Arm
• Belt Drive Platter Motor
• Large Platter Start/Stop Button
• 2 Speeds (33 & 45 RPM)
• 45 Adapter for 7" Records
• Adjustable Feet for Leveling
• Anti-Skating Tone Arm Adjustment
• Tone Arm Holder with Lock
Warning! To prevent or reduce the risk of
electrical shock or fire, do not expose this unit
to rain or moisture.
Caution! There are no user serviceable parts
inside this unit. Do not attempt any repairs
yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may
require service please contact customer sup-
port. Please do not return to your dealer with-
out first contacting customer support.
The shipping carton and packing materi-
als are constructed of recyclable material,
please recycle when ever possible.
WARRANTY INFORMATION
The TT-RECORD™ carries a ONE year (365
days) limited warranty. This warranty covers
parts and labor. Please fill out the enclosed
warranty card to validate your purchase and
warranty. All returned service items whether
under warranty or not, must be freight pre-
paid and accompany a return authorization
(R.A.) number. If the unit is under warranty,
you must provide a copy of your proof of pur-
chase invoice. Please contact American Audio®
customer support at (800) 322-6337 for a R.A.
number. All packages not displaying a R.A.
number on the outside of the package will be
returned to the shipper.
TT-Record™ Instruction Manual Page 6
©American Audio®
-
-
QUICk-START
Turntable Quick-Start:
1. Changing Platter Speed
Use the RPM selectors (5 & 6) to change the platter speeds.
2. Start/Stopping Platter
Use the Start/Stop Button (7) to start and stop playback.
3. Pitch Control
1. The pitch adjustment is a fine adjustment to the platter's RPMs.
2. The pitch adjustment is variable and may be adjusted between -10% and +10% of the platter
selected speed.
3. The pitch is changed by sliding the Pitch Slider (3) in an up and down motion.
Product Service:
1. Clean the stylus periodically with a soft brush to prevent the accumulation of dust.
2. When sound becomes distorted or noisy, check the stylus. If the stylus is worn out, replace it
with a new one.
3. From time to time, the turntable should be wiped down with a soft, dry cloth.
4. Volatile materials should not be used, such as: alcohol, thinner, benzine etc. They may remove
the paint or damage the luster.
©American Audio®
-
-
TT-Record™ Instruction Manual Page 7
ASSEMbLY
This unit has been thoroughly tested and has been shipped in perfect operating condition. Care-
fully check the shipping carton for damage that may have occurred during shipping. If the carton
appears to be damaged, carefully inspect your unit for any damage. Be sure all accessories needed
to operate the unit has arrived intact. In the event damage has been found or parts are missing,
please contact our toll free customer support number for further instructions. Please do not return
the unit to your dealer without first contacting customer support.
Some assembly required before you can begin to use your new TT-Record. Please follow the
assembly instruction below before attempting to use you new turntable.
ASSEMBLY:
Before you begin assembly please be sure all parts and accessories have arrived intact. Please use
the check list below to identify and order parts and accessories.
45 RPM Adapter
Headshell
Turntable Platter
Counter Weight
Slipmat
Rubber Foot
Headphone Adapter
©American Audio®
-
-
TT-Record™ Instruction Manual Page 8
SET-UP
NOTES:
• Do not connect the AC power plug before assembly has been completed.
• Before turning the power on, make sure once again all the connections and power voltage set-
tings are correct. Always turn off the power when connecting or disconnecting.
• Read this manual carefully before using the unit. Be sure to store the manual in a safe place for
future reference.
• Attach a stylus cartridge to the Headshell (10) before assembling the turntable unit.
Headshell and Cartridge Assembly:
When installing a cartridge, refer to the operating instructions of that cartridge. During installation,
attach the stylus protector to guard the stylus tip from damage.
Connect the Headshell (10) lead wires to the cartridge terminals. The terminals of cartridges
and the Headshell (10) lead wires are color coded. Connect each lead wire to the cartridge
terminals of the same color.
White (L+) .............……………......Left channel +
Blue (L-) ....……………................Left channel -
Red (R+) ..…………....................Right channel +
Green (R-) .......……………............Right channel -
Turntable Assembly:
1. Removing from carton:
Carefully remove the main unit with the packing material intact from the box. Remove the packing
material once the unit has been removed from the shipping carton. All accessories should be located
in the packing material.
2. Turntable Platter (1):
Remove the turntable platter from the packing material and gently insert the platter into the center
spindle on the base of the turntable unit.
3. Drive Hub:
Pull the belt to the lower side of the turntable over the drive hub.
4. Slipmat:
Remove the black slipmat from the packaging and place it on the Platter (1).
5. Headshell (10):
Insert the Headshell (12) into the front end of the Tonearm Assembly (2). While holding Headshell (10)
firmly into the front end of the tonearm assembly, turn the Headshell Locking Nut (11) counter-clock-
wise to firmly secure the Headshell (10) to Tonearm Assembly (2).
©American Audio®
-
-
TT-Record™ Instruction Manual Page 9
SET-UP
6. Counterweight (16):
Locate and remove the tonearm Counterweight (16) from the packaging. Slide Counterweight (16)
onto the rear of the Tonearm (12). Turn it lightly and it will screw onto the rear shaft of the tonearm.
Anti-Skate:
The anti-skate adjustment prevents the Tonearm Assembly (2) from skipping across the record from
the centrifugal force that is caused spinning rotation of the Platter (1). The Anti-Skating (15) control
knob should be set to the same value as the stylus pressure. For example if your Counterweight (16)
is set to 2.5 grams the Anti-Skate (15) value should also be set to 2.5.
Turntable Connections:
1. Connect the unit's stereo output leads to a receiver or mixer. The red phono terminal represents
the right output channel and the white terminal represents the left output channel.
Output Leads
Mixer (Receiver)
L (White)
-----------------------------> L Channel
R (Red)
-----------------------------> R Channel
2. Connect the power core to matching outlet for your area. Only connect the power cord after the
all other connections have been made.
Stereo phono lead
Stereo line lead
©American Audio®
-
-
TT-Record™ Instruction Manual Page 10
SET-UP
Turntable Installation:
1. Do not place the unit in a location where it will be exposed to direct sunlight or near any type of
heating appliance.
2. Do not place the unit in a location where there is high humidity or a lot of dust.
3. Cartridge may pick up slight sound pressure or vibrations of near by speakers. For best results,
do not install this unit too close to speakers.
4. Install this unit on a horizontal surface that is stable and vibration free.
5. The rubber feet have been specially designed to isolate the unit from excess vibration. The feet
may also be used to stabilize the main body horizontally. Adjust the height of the unit by turning
the feet in a clockwise or counter-clockwise direction.
©American Audio®
-
-
TT-Record™ Instruction Manual Page 11
CONTROLS AND FUNCTIONS
Main Unit
1
9
8
2
3
4
7
6
5
1. Platter -
This platter connects directly to the center spindle
(8). The platter and center spindle (8) holds a vinyl
record perfectly center. The platter also spins the
record at a consistent speed.
2. Tone Arm Assembly -
3. Pitch Adjust Slider -
This assembly will be explained in tonearm section
on the page 14.
This slider is used to adjust the playback pitch
percentage (platter speed). Use this slider to match
the BPM’s of this unit to that of another music
source.
4. Record/Stop Button -
This button is used to start and stop recording to
your USB stick.
5. 45-rpm Speed Selector Buttons -
Engaging this button will rotate the platter at 45
RPMs. A function LED will glow when this function
is activated.
©American Audio®
-
-
TT-Record™ Instruction Manual Page 12
CONTROLS AND FUNCTIONS
6. 33-rpm Speed Selector Button -
Engaging this button will rotate the platter at 33
revolutions per a minute (RPMs). A function LED will
glow when this function is activated.
7. START/STOP Button -
This over sized push button controls platter
motion. When the unit is turned on the platter will not
automatically begin to spin. Pressing the button
once will engage the high torque motor and spin the
platter, pressing this again will stop the platter.
8. Center Spindle -
9. USB Port -
This spindle holds the turntable platter (1) and
records stable and centered.
Insert your USB stick for recording.
RECORDINg TO yOUR USB STICk:
1. Select your desired record and load it onto the turntable. Insert your USB stick into the USB port
(9).
2. If you only want to record a desired song locate the song on the record.
3. Start playing the record by pressing the START/STOP button (7) and press the RECORD/STOP
button (4) to start recording to your USB stick.
4. After you finished recording your desired material, press the RECORD/STOP button (4) for the
USB stick. Then press the START/STOP button (7) to stop the record.
©American Audio®
-
-
TT-Record™ Instruction Manual Page 13
CONTROLS AND FUNCTIONS
Tonearm Assembly
10
11
12
13
14
15
16
10. Stylus Headshell -
The included headshell is used to connect your sty-
lus with the tone arm.
11. Headshell Locking Nut -
After attaching the headshell to the tonearm, this
locking nut will securely hold the headshell to the
tonearm.
12. Tone Arm -
The tonearm is the mechanism that holds the head-
shell and stylus allowing it to glide across a record.
13. Tonearm Clamp and Rest -
14. Tonearm Lever -
Use this rest to safely hold the tonearm in position
during non use and transportation.
This lever is used to safely elevates the tone arm
above a record surface without endangering a
records surface.
15. Anti-Skate Control -
16. Counterweight -
The anti-skate applies inward force to the tonearm to
prevent outward skipping across the record due to
the centrifugal force cause by platter rotation. The
anti-skate value should be equally to that of the sty-
lus counterweight pressure.
The counterweight adjustment applies the proper
downward pressure on the stylus.
©American Audio®
-
-
TT-Record™ Instruction Manual Page 14
TROUbLE ShOOTING
Trouble Shooting: Listed below are common problems you may encounter, and solutions.
The turntable has no power:
1. Check the power cord, is it connected?
The sound is distorted or on one side only:
1. Make sure that the cartridge is properly wired. Refer to the Cartridge Assembly section on page 9.
2. Check if the stylus is worn out.
3. Make sure that the cartridge is making a proper connection. If need be, remove the cartridge and
clean the contacts on the back with Isopropyl alcohol, and reinsert it.
4. Check if the selector switch on the mixer is set to "Line" instead of "Phono." If so, switch
the selector switch to "Phono." Always connect the turntable RCA cord to the Phone input on a
mixer.
5. Check the RCA cables, are they connected properly? When the RCA cables are frequently
connected and disconnected, they may become damaged and need to be replaced.
The sound level is very low:
1. Is the turntable connected to a device with a PHONO preamp. Connect the turntable to a preamp
mixer that has a PHONO input. Make sure the turntable is connected to the PHONO input, NOT
AUX or LINE.
The turntable skips consistantly:
1. Is the turntable on a unstable surface. Refer to Turntable Installation on page 11.
2. Check if the tonearm is balanced properly. Refer to Tonearm Balance and Stylus Pressure on page
11.
3. Check if the stylus is worn out.
4. Check your records, are they warped?
©American Audio®
-
-
TT-Record™ Instruction Manual Page 15
WARRANTY
1-YEAR LIMITED WARRANTY
A. American Audio® hereby warrants, to the original purchaser, American Audio® products to be
free of manufacturing defects in material and workmanship for a period of 1 Year (365 days)
from the date of purchase. This warranty shall be valid only if the product is purchased within
the United States of America, including possessions and territories. It is the owner’s responsibility
to establish the date and place of purchase by acceptable evidence, at the time service is sought.
B. For warranty service, send the product only to the American Audio® factory. All shipping charges
must be pre-paid. If the requested repairs or service (including parts replacement) are within the
terms of this warranty, American Audio® will pay return shipping charges only to a designated
point within the United States. If the entire instrument is sent, it must be shipped in its original
package. No accessories should be shipped with the product. If any accessories are shipped
with the product, American Audio® shall have no liability whatsoever for loss of or damage to
any such accessories, nor for the safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is modified
in any manner which American Audio® concludes, after inspection, affects the reliability of the
product; if the product has been repaired or serviced by anyone other than the American Audio®
factoryunlesspriorwrittenauthorizationwasissuedtopurchaserbyAmericanAudio®;iftheproductis
damaged because not properly maintained as set forth in the instruction manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning or peri-
odic check-up. During the period specified above, American Audio® will replace defective parts
at its expense, and will absorb all expenses for warranty service and repair labor by reason of
defects in material or workmanship. The sole responsibility of American Audio® under this war-
ranty shall be limited to the repair of the product, or replacement thereof, including parts, at the
sole discretion of American Audio®. All products covered by this warranty were manufactured
after January 1, 1990, and bear identifying marks to that effect.
E. American Audio® reserves the right to make changes in design and/or improvements upon its
products without any obligation to include these changes in any products theretofore manufac-
tured.
F. No warranty, whether expressed or implied, is given or made with respect to any accessory sup-
plied with products described above. Except to the extent prohibited by applicable law, all imp-
lied warranties made by American Audio® in connection with this product, including warranties of
merchantability or fitness, are limited in duration to the warranty period set forth above. And no
warranties, whether expressed or implied, including warranties of merchantability or fitness, shall
apply tothisproductaftersaidperiodhasexpired. Theconsumer’sandorDealer’ssoleremedyshall
be such repair or replacement as is expressly provided above; and under no circumstances shall
American Audio® be liable for any loss or damage, direct or consequential, arising out of the use
of, or inability to use, this product.
G. This warranty is the only written warranty applicable to American Audio® Products and super-
sedes all prior warranties and written descriptions of warranty terms and conditions heretofore
published.
©American Audio®
-
-
TT-Record™ Instruction Manual Page 16
SPECIFICATIONS
GENERAL
Model:
American Audio® TT-Record - Turntable Mp3 Recorder
2-Speed Belt Drive Phono Turntable
449 (W) x 370 (D) x 145 (H) mm
Place on flat surface or mount in flat case
8.3 Lbs. / 3.8 Kgs
System:
Dimensions:
Installation:
Weight:
Power supply:
AC 115/230V, 50/60Hz User Selectable
Single Voltage:
AC 100V, 50/60Hz (Japan)
AC 110V, 60Hz (Colombia)
AC 120V, 60Hz (U.S.A. and Canada)
AC 127V, 60Hz (Mexico)
AC 220V, 50Hz (Chile and Argentina)
AC 220V, 60Hz (Philippines and Korea)
AC 230V, 50Hz (Europe, New Zealand, South Africa, and Singapore)
AC 240V, 50Hz (Australia and U.K.)
9W
Power consumption:
Environmental conditions:
Operational Temperature:
Operational Humidity:
Storage Temperature:
5 to 35˚C
(41 to 95˚F)
45 to 85% RH(non-condensation)
-10 to 60˚C (4 to 140˚F)
Instruction Manual, Connecting Cord, Cartridge, Counter Weight
Headshell, AC Cord, Slipmat, RCA Cable
45 Adapter
Accessories:
TURNTAbLE SECTION
Type:
2-Speed Fully Manual
Motor:
DC Motor
Driving Method:
Turntable Platter:
Speeds:
Wow and Flutter:
S/N Ratio:
Pitch Controls:
Starting Time:
Braking Time:
Time for Speed Change:
Belt Drive
330mm dia. Aluminum Diecast
33 1/3 and 45-rpm
Less than 0.2% WRMS (JIS WTD) with 33 1/3rpm
More than 55dB (DIN-B)
+/- 10%
Less than 1 sec. with 33 1/3
Less than 1 sec. with 33 1/3
Less than 1 sec. from 33 1/3 to 45 rpm.
Less than 1 sec. from 45 to 33 1/3 rpm.
USB rec. Function (only for Mp3 format)
USB Function:
TONEARM SECTION
Type:
Static balanced S-shaped tonearm with detachable headshell
Effective Arm Length:
Overhang:
230.5mm
10mm
Tracking Error Angle:
Applicable Cartridge Weight:
Anti-skating Range:
Phono Output Level:
Line Output Level:
Frequency Response:
Channel Separation:
Channel Balance:
Less than 3 degree
6-10g
0~4g
1.5~3.6mV at 1KHz 5cm/sec
90~216mV at 1KHz 5cm/sec
20Hz - 20KHz
More than 15 dB
Within 2.5dB at 1KHz
3~4g
Needle Pressure range:
High of Cue (First Track):
Descend of Cue:
6~10.5mm
1~3sec
©American Audio®
-
-
TT-Record™ Instruction Manual Page 17
©American Audio®
American DJ® Group of Companies World Headquarters:
6122 S. Eastern Ave. Los Angeles, CA 90040 USA
Tel: 323-582-2650 Fax: 323-582-2610
|