RazzMaTazz™
Unpacking
Thank you for purchasing the RazzMaTazz™ by American DJ®. Every
RazzMaTazz™ has been thoroughly tested and has been shipped in
perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears
to be damaged, carefully inspect your unit for any damage and be sure
all equipment necessary to operate the system has arrived intact. In the
event damage has been found or parts are missing, please contact our
toll free customer support number for further instructions. Please do not
return the unit to your dealer without first contacting customer support.
RazzMaTazz™
Introduction
Customer Support:
American DJ® provides a toll free customer support line, to provide set
up help and to answer any question should you encounter problems
during your set up or initial operation. You may also visit us on the web
related issue please contact American DJ®. Service Hours are Monday
through Friday 9:00 a.m. to 5:00 p.m. Pacific Standard Time.
Voice:
Fax:
(800) 322-6337
(323) 582-2610
E-mail:
Warning! To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
your nearest American DJ dealer.
PLEASE do not discard the shipping carton in the trash. Please
recycle when ever possible.
User Instructions
Safety Issues: This unit may blow a fuse if the maximum allotted
load of 15 amps is reached. If the fuse needs replacement, always
replace the fuse with same exact type that was remove, unless
otherwise instructed by an authorized American DJ® service techni-
cian. Use of a different type fuse from that which is recommended may
cause fire or electric shock and will void the manufactures warranty.
American DJ
4295 Charter Street
Los Angeles Ca. 90058
RazzMaTazz™
Warranty Registration
RazzMaTazz™
Warranty
90 DAY LIMITED WARRANTY
The RazzMaTazz™ carries a 90 day limited warranty. We recommend
you fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) number.
If the unit is under warranty, you must provide a copy of your proof
of purchase invoice. Please contact American DJ® customer support
for a R.A. number.
A. American DJ® hereby warrants, to the original purchaser, American DJ® products to be
free of manufacturing defects in material and workmanship for a period of 90 days from the
date of purchase. This warranty shall be valid only if the product is purchased within the
United States of America, including possessions and territories. It is the owner’s responsibil-
ity to establish the date and place of purchase by acceptable evidence, at the time service
is sought.
B. For warranty service, send the product only to the American DJ® factory. All shipping
charges must be pre-paid. If the requested repairs or service (including parts replacement)
are within the terms of this warranty, American DJ® will pay return shipping charges only
to a designated point within the United States. If the entire instrument is sent, it must be
shipped in its original package. No accessories should be shipped with the product. If any
accessories are shipped with the product, American DJ® shall have no liability whatsoever
for loss of or damage to any such accessories, nor for the safe return thereof.
RazzMaTazz™
Lamp Replacement
Lamp Replacement: Caution! Never open the unit while in use.
Always disconnect the main power before attempting to replace the
lamps. Allow the unit ample time to cool before replacing lamps
C. This warranty is void if the serial number has been altered or removed; if the product
is modified in any manner which American DJ® concludes, after inspection, affects the reli-
ability of the product; if the product has been repaired or serviced by anyone other than the
American DJ® factory unless prior written authorization was issued to purchaser by Ameri-
can DJ®; if the product is damaged because not properly maintained as set forth in the
instruction manual.
1. Be sure to follow the proper procedures when handling halogen
bulbs.
2. Locate the lamp cover on the top of unit. Remove the two thumb
screw that hold lamp cover in place.
3. Remove the lamp cover to expose the lamp/socket assembly.
4. Gently remove and discard the bad lamps.
5. Insert the new lamps in the lamp/socket assembly.
6. Reassemble in reverse order.
D. This is not a service contract, and this warranty does not include maintenance, cleaning
or periodic check-up. During the period specified above, American DJ® will replace defective
parts at its expense, and will absorb all expenses for warranty service and repair labor by
reason of defects in material or workmanship. The sole responsibility of American DJ® under
this warranty shall be limited to the repair of the product, or replacement thereof, including
parts, at the sole discretion of American DJ®. All products covered by this warranty were
manufactured after January 1, 1990, and bear identifying marks to that effect.
Remember to always replace with the exact same type lamp and
fuse, unless otherwise specified by an authorized American DJ®
service technician.
E. American DJ® reserves the right to make changes in design and/or improvements upon
its products without any obligation to include these changes in any products theretofore
manufactured.
RazzMaTazz™
Fuse Replacement
F. No warranty, whether expressed or implied, is given or made with respect to any acces-
sory supplied with products described above. Except to the extent prohibited by applicable
law, all implied warranties made by American DJ® in connection with this product, including
warranties of merchantability or fitness, are limited in duration to the warranty period set
forth above. And no warranties, whether expressed or implied, including warranties of mer-
chantability or fitness, shall apply to this product after said period has expired. The con-
sumer’s and or Dealer’s sole remedy shall be such repair or replacement as is expressly
provided above; and under no circumstances shall American DJ® be liable for any loss or
damage, direct or consequential, arising out of the use of, or inability to use, this product.
Fuse Replacement: To replace the protective fuse, use a flat head
screwdriver to unscrew and remove the fuse holder. Gently remove the
old fuse and replace it with a new one. Insert the fuse holder back into
the fuse housing and tighten. Always replace with the exact same type
fuse removed unless otherwise specified by an authorized American
DJ® service technician.
Caution: Always disconnect the units main power before performing
any type of service or fuse replacement!
G. This warranty is the only written warranty applicable to American DJ® Products and
supersedes all prior warranties and written descriptions of warranty terms and conditions
heretofore published.
For any other service related issues, please contact American DJ®
customer support.
H. Lamps are not covered under this warranty
Technical Specifications:
™
Model: RazzMaTazz
Lamp:
2 x LL-64514, 120v/300w
Voltage*:
110v~120v / 60Hz or
220v~240v /50Hz
11.5"x13.25"x11.75"
6 colors plus white
11 Lbs.
Dimensions:
Colors
Weight:
Fuse:
10 Amp AGC
Duty Cycle:
Lenses:
15 min. ON/ 15 min. OFF
32 clear produce 64
multicolored beams
Yes
Sound Active:
Working Position:
Any Safe position
* Operating voltage is preset at the factory.
Please Note: Specifications and improvements in the design of
this unit and this manual are subject to change without any prior
written notice.
©American DJ Supply
American DJ World Headquarters:
4295 Charter Street Los Angeles, CA 90058 USA
Tel: 323-582-2650 / Fax: 323-582-2610
|