WILLIAMSBURG™
COUNTERTOP SINK
VITREOUS CHINA
BARRIER FREE
WILLIAMSBURG COUNTERTOP SINK
• Vitreous china
• Self-rimming
• Front overflow
• Supplied with cutout template
• Faucet ledge (faucet not included)
❏ 0558.700 Faucet holes on 8” (203mm) centers
❏ 0554.700 Faucet holes on 4” (102mm) centers
(illustrated)
Nominal Dimensions:
24-1/2" x 18" (622 x 457mm)
Bowl sizes:
17" (432mm) wide,
10-1/2" (267mm) front to back,
5-1/2" (140mm) deep
FINISHED WALL
OR SPLASHBACK
610mm
(24)
70mm
(2-3/4)
Compliance Certifications -
Meets or Exceeds the Following
Specifications:
102mm
(4)
OPTIONAL
67mm
(2-5/8)
183mm
(7-3/16)
• ASME A112.19.2M for Vitreous China
Fixtures
203mm
(8)
MIN.
457mm
(18)
C/L
857mm
(33-1/4)
686mm
(27)
MIN.
616mm
(24-1/4)
152mm
(6)
MAX.
SEALING
COMPOUND
19mm
(3/4)
COUNTER (BY OTHERS)
BARRIER FREE
CLEARANCE
229mm
(9)
To Be Specified
178mm
(7)
MIN.
*
248mm
(9-3/4)
❏
❏
❏
❏
❏
Color:
*343mm
203mm
(8)
Faucet*:
SUPPLIES
AS REQ'D
(13-1/2)
178mm
(7)
Faucet Finish:
Supplies:
1-1/4" Trap:
1-1/4 O.D.
WASTE
787mm (31)
857mm (33-1/4)
FINISHED FLOOR
1-1/4 O.D
TAILPIECE
NOTES:
* See faucet section for additional models available
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP ARE SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE TEMPLATE SUPPLIED
WITH SINK.
*
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances
established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use of
superseded or voided pages.
MEETS THE AMERICAN DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USEABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Install lavatory 864mm (34") from finished floor.
Lavatory installed 70mm (2-3/4") minimum from front edge
of countertop provides 686mm (27") knee clearance
area.
© 2003 American Standard Inc.
|