SH Series
SH SERIES CLAMPING RACK SHELVES
FEATURES
• Designed to rack mount consumer electronics into standard Atlas Sound equipment racks
• 3 vertical heights available, 2, 3, and 4RU
• 2 depths @ 15" and 22" mounts most equipment
• Sturdy 16 gauge construction with generous ventilation slots on the bottom and sides
• Optional clamping brackets secures equipment from the top of the shelf
• Optional rear rack rail support available for heavy equipment loads
APPLICATION
The new Atlas Sound clamping rack shelf systems are designed to rack mount consumer and
"prosumer" electronics into standard Atlas Sound vertical equipment racks. Offering sturdy side,
rear, top and side support, the Atlas Sound SH Series rack shelves will support VCRs, surround
sound receivers, RF modulators, etc. Optional adjustable clamping brackets secure equipment
from the top and include "L" brackets to provide a component stop from the rear. For heavier
loads needing rear support, the Atlas Sound SHRSB bracket kits securely attach the SH shelf
to the rear rack rail of your rack.
SH15-2
(w/o Accessories)
MODEL
SH15-2
DESCRIPTION
2 SP 15" Deep Rack Shelf
SH15-3
SH15-4
SH22-2
SH22-3
SH22-4
SHRSB2
SHRSB3
SHRSB4
SHCK
3 SP 15" Deep Rack Shelf
4 SP 15" Deep Rack Shelf
2 SP 22" Deep Rack Shelf
3 SP 22" Deep Rack Shelf
SH15-2
(with optional SHRSB2
and SHCK)
4 SP 22" Deep Rack Shelf
Optional 2 SP Rear Support Bracket for SH15-2 & SH22-2
Optional 3 SP Rear Support Bracket for SH15-3 & SH22-3
Optional 4 SP Rear Support Bracket for SH15-4 & SH22-4
Optional Clamping Kit for All Models
ARCHITECH AND ENGINEER SPECIFICATIONS
Rack mount equipment tray shall be Atlas Sound SH Series Clamping rack shelf. Clamping
shelf to be constructed of 16 gauge steel finished in black and in 3 standard EIA compliant
heights (2, 3, and 4RU) and two depths measuring 15" and 22". Equipment ventilation slots
shall located on the bottom rear portion and in each vertical side member. Wire lacing slots
shall be located on the rear 90˚ vertical bend. Three optional rear support brackets shall be
Atlas Sound SHRSB-2, -3, and -4. Optional equipment clamping kit shall be Atlas Sound model
SHCK which shall fit all three models.
SH22-3
(w/o Accessories)
SH22-3
(with SHRSB3)
Specifications subject to change without notice
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
AtlasSound.com
435
© 2006 Atlas Sound
Printed in U.S.A.
000106
ATS002224 RevA 01/06
SL10-2082
|