Specifications
Throat Diameter (1)
Nominal Impedance
Minimum Impedance
Nominal Power Handling (2)
Continuous Power Handling (3)
Sensitivity (1W/1m) (4)
Frequency Range
Recommended Crossover (5)
Voice Coil Diameter
Winding Material
50 mm (2 in)
8 ohm
8 ohm
80 W
160 W
108.5 dB
0.4 -10 kHz
400 Hz
51 mm (2 in)
Aluminium
0.18 mH
Composite
2.1 T
Inductance
Diaphragm Material
Flux Density
Mounting and Shipping Info
Four M6 holes 90° on 102 mm
(4 in) diameter
Overall Diameter
Depth
Net Weight
152 mm (6 in)
108 mm (4.25 in)
3.2 kg (7 lb)
Shipping Weight
Shipping Box
3.4 kg (7.5 lb)
170x170x140 mm
(6.7x6.7x5.5 in)
1
Driver mounted on 320 Hz exponential horn
2
2 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance.
3
Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
MF Drivers
160 W continuous program power capacity
2” horn throat diameter
DCM50
4
5
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
12 dB/oct. or higher slope high-pass filter.
400 – 10000 Hz response
108.5 dB sensitivity
Neodymium magnet assembly
|