Technical Specifications
Version 1.0 January 2006
XENYX 2222FX
BLOCK DIAGRAM
3
XENYX 2222FX
SPECIFICATIONS
Microphone inputs (XENYX Mic Preamp)
Main outputs
Type
XLR, electronically balanced,
discrete input circuit
Type
XLR, electronically balanced
and 1/4" TRS balanced
approx. 240 W balanced /
120 W unbalanced
+28 dBu
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 W source resistance
@ 50 W source resistance
@ 150 W source resistance
Impedance
-134 dB / 135.7 dB A-weighted
-131 dB / 133.3 dB A-weighted
-129 dB / 130.5 dB A-weighted
Max. output level
Control room outputs
Type
Impedance
Frequency response
<10 Hz - 150 kHz (-1 dB),
<10 Hz - 200 kHz (-3 dB)
1/4" TS connector unbalanced
approx. 120 W
Max. output level
+22 dBu
Gain range
+10 to +60 dB
Headphones outputs
Type
Max. output level
Max. input level
Impedance
Signal-to-noise ratio
+12 dBu @ +10 dB Gain
approx. 2.6 kW balanced
110 dB / 112 dB A-weighted
(0 dBu In @ +22 dB gain)
1/4" TRS connector, unbalanced
+19 dBu / 150 W (+25 dBm)
DSP
24-bit
Converter
24-bit Sigma-Delta,
64/128-times oversampling
Distortion (THD+N)
0.005% / 0.004% A-weighted
Sampling rate
40 kHz
Line input
Type
1/4" TRS connector
electronically balanced
Main mix system data2
Impedance
approx. 20 kW balanced
10 kW unbalanced
-10 to +40 dB
Noise
Main mix @ -oo,
Channel fader @ -oo
-101 dB
-93 dB
-81 dB
Gain range
Main mix @ 0 dB,
Channel fader @ -oo
Main mix @ 0 dB,
Channel fader @ 0 dB
Max. input level
+22 dBu @ 0 dB Gain
Fade-out attenuation1
(Crosstalk attenuation)
Main fader closed
Channel muted
Channel fader closed
90 dB
89 dB
89 dB
Power supply
Mains voltage
Power consumption
Fuse
100 to 240 V~, 50/60 Hz
46 W
100 - 240 V~: T 1.6 A H 250 V
Standard IEC receptacle
Frequency response
Microphone input to main out
<10 Hz - 90 kHz
Mains connection
+0 dB / -1 dB
+0 dB / -3 dB
Physical/weight
Dimensions (H x W x D)
<10 Hz - 160 kHz
approx. 3 7/8" x 16 1/16" x 14 1/16"
(97 mm x 408 mm x 367 mm)
approx. 4.8 kg
Stereo inputs
Type
Weight (net)
1/4" TRS connector,
electronically balanced
Impedance
approx. 20 kW
Max. input level
+22 dBu
EQ mono channels
Low
Mid
High
80 Hz / ±15 dB
100 Hz - 8 kHz / ±15 dB
12 kHz / ±15 dB
EQ stereo channels
Low
80 Hz / ±15 dB
500 Hz / ±15 dB
3 kHz / ±15 dB
12 kHz / ±15 dB
Low Mid
High Mid
High
Aux sends
Type
Impedance
Max. output level
1/4" TS connector, unbalanced
approx. 120 W
+22 dBu
Measuring conditions:
1:
1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output; unity gain.
2:
20 Hz - 20kHz; measured at main output. Channels 1 - 4 unity gain; EQ flat; all
channels on main mix; channels 1/3 as far left as possible, channels 2/4 as far
right as possible. Reference = +6 dBu.
Stereo aux returns
Type
1/4" TRS connector,
electronically balanced
approx. 20 kW bal. / 10 kW unbal.
+22 dBu
BEHRINGER is constantly striving to manintain the highest professional standards. As a
result of these efforts, modifications may be made from time to time to existing products without
prior notice. Specifications and appearance may differ from those listed or illustrated.
Impedance
Max. input level
4
XENYX 2222FX
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. The names
of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Their use
neither constitutes a claim of the trademarks by BEHRINGER® nor affiliation of the trademark owners with BEHRINGER®. BEHRINGER® accepts no
liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained
herein. Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not
agents of BEHRINGER® and have absolutely no authority to bind BEHRINGER® by any express or implied undertaking or representation. No part of this
manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for
any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registered trademark.
ALL RIGHTS RESERVED. © 2006 BEHRINGER Spezielle Studiotechnik GmbH,
Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany.
Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
5
|