ULTRALINK PRO MX882
FOREWORD
Dear Customer,
Welcome to the team of ULTRALINK PRO users and thank you very much for expressing your confidence in
BEHRINGER products by purchasing this unit.
It is one of my most pleasant tasks to write this letter to you, because it is the culmination of many months of
hard work delivered by our engineering team to reach a very ambitious goal: making an outstanding device
better still. The ULTRALINK has for quite a long time been a standard tool used by numerous studios and P.A.
rental companies. The task to improve one of our best-selling products certainly meant a great deal of
responsibility, which we assumed by focusing on you, the discerning user and musician. It also meant a lot of
work and night shifts to accomplish this goal. But it was fun, too. Developing a product usually brings a lot of
people together, and what a great feeling it is when everybody who participated in such a project can be proud
of what we’ve achieved.
It is our philosophy to share our joy with you, because you are the most important member of the BEHRINGER
family. With your highly competent suggestions for new products you’ve greatly contributed to shaping our
company and making it successful. In return, we guarantee you uncompromising quality (manufactured under
ISO9000 certified management system) as well as excellent technical and audio properties at an extremely
favorable price. All of this will enable you to fully unfold your creativity without being hampered by budget
constraints.
We are often asked how we can make it to produce such high-grade devices at such unbelievably low prices.
The answer is quite simple: it’s you, our customers! Many satisfied customers means large sales volumes
enabling us to get better conditions of purchase for components, etc. Isn’t it only fair to pass this benefit back
to you? Because we know that your success is our success, too!
I would like to thank all people whose help on “Project ULTRALINK PRO” has made it all possible. Everybody
has made very personal contributions, starting from the designers of the unit via the many staff members in our
company to you, the user of BEHRINGER products.
My friends, it’s been worth the trouble!
Thank you very much,
Uli Behringer
3
ULTRALINK PRO MX882
ULTRALINK PRO
Ultra-flexible, multi-purpose 8-channel Signal Router for stage and studio applications
s
Use it as Effects Mixer, for P.A. Monitoring, Live Sound Systems, Theaters, Conference Rooms, Hotels,
Churches, etc.
s
s
s
s
s
s
s
s
Any channel can be selected either as Mixer or Splitter
You can use it as 8-IN, 2-OUT Line Mixer
You can use it as 2-IN, 8-OUT Line Splitter
You can use it as 6-IN, 6-OUT Line Driver or DI-box
You can use it as independent line driver to convert -10 dBV into +4 dBu or vice versa
Extremely high headroom—offering more dynamic range
Ultra-wide bandwidth from 2 Hz to 200 kHz for “open” sound
Offers you 6 mono inputs, 6 mono outputs, 2 main inputs and 2 main outputs
s
s
s
s
s
s
s
Offers you 6 Input Level controls, 6 Balance/Pan controls, a Main Input and a Main Output control
A Main Link switch allows you to route the Main Input to the Main Output to link several units
Accurate 4 / 8-segment LED metering for each individual gain section
Servo-balanced gold-plated XLR and 1/4" TRS inputs and outputs
Completely versatile DI-Box due to servo-balanced inputs and outputs
Ultra low-noise 4580 audio operational amplifiers for outstanding sound performance
High-quality detented potentiometers and illuminated switches
s
Manufactured under ISO9000 certified management system
4
ULTRALINK PRO MX882
TABLE OF CONTENTS
1. INTRODUCTION.....................................................................................................................6
2. THE DESIGN CONCEPT .......................................................................................................7
2.1 High quality components and design ............................................................................................... 7
2.2 Inputs and outputs .......................................................................................................................... 7
2.2.1 Balanced inputs and outputs................................................................................................. 7
3. INSTALLATION .......................................................................................................................7
3.1 Rack mounting................................................................................................................................ 7
3.2 Mains voltage .................................................................................................................................. 7
3.3 Audio connections .......................................................................................................................... 8
4. CONTROL ELEMENTS .........................................................................................................9
4.1 The front panel control elements ..................................................................................................... 9
4.2 The rear panel elements ................................................................................................................ 10
5. BLOCK DIAGRAM ................................................................................................................ 11
6. APPLICATIONS .....................................................................................................................12
6.1 Application as a mixer .................................................................................................................. 12
6.2 Application as a splitter................................................................................................................. 13
6.2.1 The ULTRALINK PRO as a 4-channel stereo splitter ........................................................... 13
6.3 Application as a matching amplifier ............................................................................................... 14
7. SPECIFICATIONS .................................................................................................................15
8. WARRANTY..................................................................................................................... ......16
5
ULTRALINK PRO MX882
1. INTRODUCTION
With the BEHRINGER ULTRALINK PRO you have purchased an ultra-flexible “problem solver” in signal
distribution applications, designed to meet highest requirements: professional recording, broadcast and
television studios, CD and digital production facilities, etc. Much like an all-in-one tool, it provides virtually
unlimited configurations. Be it the distribution of a stereo signal to several outputs (splitter); the combination of
separate signals to one stereo output (mixer), or the specific level adaption of individual signals (buffer
amplifier): the ULTRALINK PRO can perform all of these functions easily - and simultaneously.
Future-oriented BEHRINGER technology
Our ULTRALINK range of devices has been a hit ever since we introduced our first model several years ago.
This splitter/mixer is based on many years of experience and findings in mixing technology and is used
throughout the world in renowned studios, sound reinforcement systems as well as in broadcast and television
studios.
It was a real challenge to improve the well-known ULTRALINK even further, and we are proud of our success.
Compared to its predecessor models, the ULTRALINK PRO not only has additional features, but also comes
with dramatically improved functionality. For example, it now has input and output level meters and balanced
in- and outputs.
The architecture of the ULTRALINK PRO
Basically, the unit consists of six mono channels, which can be used either as a splitter or as a mixer. For
instance, a stereo program source can be inserted via the main input to be subsequently routed to any of the
mono channels that are set to SPLIT mode. Using the individual BALANCE/PAN control, you can—for each
channel—determine the ratio between the left and right main input signals that are routed to the corresponding
output of the channels. Thus, the stereo input signal coming from the main input section can be distributed
selectively among the six mono output channels.
In MIX mode, the input signals from the respective channel(s) can be mixed at the stereo main output, with the
individual BALANCE/PAN control determining the signal ratio between the left and right main outputs (pan
function). It is of particular advantage that, in MIX mode, the stereo input signal from the main input section is
alternatively routed to the main outputs. By using this feature a total of up to 8 single signals can be combined.
In MIX mode, the mono input signals are simultaneously applied to the respective mono outputs, which permits
each channel to be used as an individual matching amplifier. The LEVEL controls in the corresponding
channels enable the user to adapt the levels at will, with a maximum gain of +15 dB. Levels used in home-
recording can therefore be converted into studio levels (+4 dBu), and vice versa.
Typical applications
The ULTRALINK PRO MX882 is one of the most flexible systems of its type. The following applications can be
realized:
2 IN/8 OUT splitter, 8 IN/2 OUT mixer, 6 IN/6 OUT matching amplifier or any other combination.
s
s
Keyboard submixer
Distribution amplifier for P.A. systems, discotheques, theatres, churches, hotels, communication
systems, etc.
s
s
s
Add-on module for mixer channels
Add-on module for effect and monitor paths
Level translator from -10 dBV to +4 dBu etc.
By combining several ULTRALINK PROs you can set up, for instance, a 24-channel mixer or splitter.
+
The following operational manual will introduce you to the BEHRINGER ULTRALINK PRO and
its various functions. After reading the manual carefully, make sure it is always on hand for
future reference.
6
1. INTRODUCTION
ULTRALINK PRO MX882
2. THE DESIGN CONCEPT
2.1 High quality components and design
The philosophy behind BEHRINGER products guarantees a no-compromise circuit design and employs the
best choice of components. The operational amplifiers NJM4580 which are used in the ULTRALINK PRO, are
exceptional. They boast extreme linearity and very low distortion characteristics. To complement this design
the choice of components includes high tolerance resistors and capacitors, detent potentiometers and several
other stringently selected elements.
For the first time, the ULTRALINK PRO MX882 uses SMD technology (Surface Mounted Device). These
sub-miniature components known from aerospace technology allow for an extreme packing density and
improved reliability. Additionally, the unit is manufactured in compliance with a ISO9000 certified management
system.
2.2 Inputs and outputs
2.2.1 Balanced inputs and outputs
As standard, the BEHRINGER ULTRALINK PRO is installed with electronically servo-balanced inputs and
outputs. The new circuit design features automatic hum and noise reduction for balanced signals and thus
allows for trouble-free operation, even at high operating levels. Externally induced mains hum etc. will be
effectively suppressed. The automatic servo-function recognizes the presence of unbalanced connectors and
adjusts the nominal level internally to avoid level differences between the input and output signals (correction
6 dB).
3. INSTALLATION
Your BEHRINGER ULTRALINK PRO was carefully packed in the factory and the packaging was designed to
protect the unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging
and its contents for any signs of physical damage, which may have occurred in transit.
+
If the unit is damaged, please do not return it to us, but notify your dealer and the shipping
company immediately, otherwise claims for damage or replacement may not be granted.
Shipping claims must be made by the consignee.
3.1 Rack mounting
The BEHRINGER ULTRALINK PRO fits into one standard 19" rack unit of space (1 3/4"). Please allow at least
an additional 4" depth for the connectors on the back panel. Be sure that there is enough air space around the
unit for cooling and please do not place the ULTRALINK PRO on high temperature devices such as power
amplifiers etc. to avoid overheating.
3.2 Mains voltage
Before you connect your ULTRALINK PRO to the mains, please make sure that your local voltage
matches the voltage required by the unit! The fuse holder on the female mains connector has 3 triangular
markers, with two of these triangles opposing each other. Your ULTRALINK PRO is set to the operating voltage
printed next to these markers, and can be set to another voltage by turning the fuse holder by 180°. CAUTION:
this instruction does not apply to export models exclusively designed, e.g. for 115 V operation!
2. THE DESIGN CONCEPT
7
ULTRALINK PRO MX882
3.3 Audio connections
The audio inputs and outputs on the BEHRINGER ULTRALINK PRO are fully balanced. If possible, connect the
unit to other devices in a balanced configuration to allow for maximum interference immunity.
Unbalanced use of
Balanced use of
mono 1/4" jack plugs
stereo 1/4" jack plugs
Tip =
Signal
Tip =
hot (+ve)
Ring =
cold (-ve)
Sleeve =
Ground / Shield
Sleeve =
Ground / Shield
Tip
Tip
Ring
Sleeve
Sleeve
Strain relief clamp
Strain relief clamp
For connection of balanced and
unbalanced plugs, ring and sleeve have
to be bridged at the stereo plug.
Balanced use with XLR connectors
2
1
1
2
1 = Ground / Shield
2 = hot (+ve)
3 = cold (-ve)
3
3
Input
Output
For unbalanced use pin 1 and pin 3 have to be bridged
Fig. 3.1: Different plug types
+
Please ensure that only qualified persons install and operate the ULTRALINK PRO. During
installation and operation the user must have sufficient electrical contact to earth. Electro-
static charges might affect the operation of the ULTRALINK PRO!
8
3. INSTALLATION
ULTRALINK PRO MX882
4. CONTROL ELEMENTS
Fig. 4.1: ULTRALINK PRO front panel
The BEHRINGER ULTRALINK PRO has six identical channels. Each channel is equipped with two rotary
controls, one button and eight LEDs. Moreover there is a main section with two rotary controls, one button and
eight LEDs.
4.1 The front panel control elements
Fig. 4.2: Control elements on the front panel
1
2
3
4
The MAIN INPUT LEVEL control sets the main input gain, before the signal reaches the input bus. In
SPLIT mode, the MAIN INPUT LEVEL control determines the common output level for all mono outputs.
The 4-digit INPUT LEVEL meter informs you about the input level of the main input within a range from
-24 to +6 dB.
By depressing the MAIN LINK switch you can route the MAIN INPUT signal to the MAIN OUT. This way
it is possible to route a maximum of eight input channels to the main mix.
The MAIN OUTPUT LEVEL control adjusts the output level applied to the main outputs. The levels
present at the six mono outputs are not affected. Summing the signal levels of several mono channels
can overload the main output stage. The MAIN OUTPUT LEVEL control is therefore used to adjust the
overall output level.
5
The 4-digit OUTPUT LEVEL meter informs you about the output level of the main input within a range
from -24 to +6 dB.
6
7
This SPLIT/MIX switch sets the respective channel to SPLITTER or MIXER mode.
The LEVEL control determines the signal level of the individual channels. In SPLIT mode, the LEVEL
control sets the output level of the mono channels. In MIX mode, however, it controls the amount of the
mono channel's input signal feeding into the main output section; at the same time, the level of the mono
channel can be determined, which—owing to the maximum gain of +15 dB—allows for converting, e.g.,
home recording levels (-10 dBV) into studio levels (+4 dBu).
8
The 8-digit OUTPUT LEVEL meter informs you about the output level of each channel within a range
from -24 to +18 dB.
4. CONTROL ELEMENTS
9
ULTRALINK PRO MX882
9
With the BALANCE/PAN control you can set the balance between the left and right main signals. In
SPLIT mode, the main input signal is routed to the mono output, with the BALANCE control determining
the balance beween the left and right main signal portions. In MIX mode, the mono inputs are mixed and
routed via the LEVEL control to the main outputs, with the PAN controls determining the allocation of
the mono inputs to the left and right main outputs.
4.2 The rear panel elements
Fig. 4.3: Rear panel elements
10
FUSE HOLDER / VOLTAGE SELECTOR. Please make sure that your local voltage matches the
voltage indicated on the unit, before you attempt to connect and operate the ULTRALINK PRO. Blown
fuses may only be replaced by fuses of the same type and rating.
11
12
13
14
MAINS CONNECTION. Use the enclosed power cord to connect the unit to the mains. Please also note
the instructions given in chapter 3 “INSTALLATION” .
MAIN INPUTS. These are the main audio inputs of your ULTRALINK PRO, available as balanced XLR
connectors. They may feed the mono outputs of all channels which are operated in SPLIT mode.
MAIN OUTPUTS. These are the main outputs, available as balanced XLR connectors. They may be fed
either by the left and right main inputs or by any of the six mono inputs (or a combination of both).
MONO INPUTS (channel 1 to 4). These are the mono inputs. Connection takes place via balanced XLR
connectors.
15
16
MONO OUTPUTS (channel 1 to 4). These are the mono outputs, available as balanced XLR connectors.
MONO INPUTS (channel 5 to 6). These are the mono inputs. Connection takes place via balanced
phone jacks.
17
MONO OUTPUTS (channel 5 to 6). These are the mono outputs, available as balanced phone jacks.
+
Please take the time to fill in and return the warranty card within 14 days after the date of
purchase, so as to benefit from our extended warranty. Or use our online registration option
10
4. CONTROL ELEMENTS
ULTRALINK PRO MX882
5. BLOCK DIAGRAM
Fig. 5.1: Block diagram of the BEHRINGER ULTRALINK PRO MX882
MAIN Section
Both main inputs interface via the MAIN INPUT LEVEL control with the input bus as well as with the main
outputs. The MAIN OUTPUT LEVEL control determines the output level of the signals which are summed by
the second bus (i.e., the output bus) and are subsequently routed to the main outputs.
SPLIT Mode
In SPLIT mode, the main input signal is sent via the BALANCE control to the output buffer amplifiers of the
mono channels, with the LEVEL control determining the output level of the respective channel. The maximum
gain is +15 dB.
MIX Mode
In MIX mode, the input signals of the mono channels are “collected” via the LEVEL and PAN controls and are
routed to the output bus. In this mode, the LEVEL control determines the amount of each channel at the output
bus, while the PAN control is responsible for the allocation of the input signal to the left and right main outputs.
Additionally, the input signal is routed to the respective mono outputs, i.e., the circuit acts as a matching
amplifier. The LEVEL control allows for level compensation of up to +15 dB.
5. BLOCK DIAGRAM
11
ULTRALINK PRO MX882
6. APPLICATIONS
6.1 Application as a mixer
Fig. 6.1: Block diagram of the MIXER function
When the mono channels are operated in MIX mode, a maximum of 8 (6+2) mono input signals can be
summed and routed to the main outputs. In this mode, the individual signal sources are connected to the mono
inputs on the BEHRINGER ULTRALINK PRO. Each channel has a LEVEL knob to control the amount of its
signal relative to others in the main section. Via the corresponding PAN control, each mono input signal can be
routed either to the left or right main output. Of course, any intermediate pan settings can be achieved as well.
The MAIN OUTPUT LEVEL control determines the overall level of the main output signal.
Since the two main inputs are alternatively routeable to the main outputs, two additional input signals can be
added using the main inputs. For this you have to depress the MAIN LINK switch. However, as these inputs do
not feature a PAN control, the left main input will always be routed to the left main output; similarly, the right
main input can only be sent to the right main output. A total of 8 mono channels can thus be routed to two
main outputs.
12
6. APPLICATIONS
ULTRALINK PRO MX882
6.2 Application as a splitter
Fig. 6.2: Block diagram of the SPLITTER function
A splitter is a distribution amplifier which allows for splitting a specific input signal to several outputs. This
function is of use, e.g., in a large-scale sound reinforcement system where the mixer's output signal needs to
be allocated to several power amplifiers. Another field of application is in tape duplication systems, where one
master tape machine is to be interfaced with several tape duplication recorders.
In this mode, the output signal from the mixer is applied to the main inputs of the BEHRINGER
ULTRALINK PRO. If the SPLIT/MIX switches are set to “SPLIT”, the mono outputs of the respective channels
provide either the left or the right main signal. Depending on the setting of the BALANCE control, any balance
between left and right main signal can be adjusted.
At the same time, the main input signal is also sent to the left or right main output, so that here two additional
splitter outputs are available. Please note that these outputs do not feature a balance routing function. The left
main input is routed exclusively to the left main output; similarly, the right main input feeds the right main
output only.
6.2.1 The ULTRALINK PRO as a 4-channel stereo splitter
For this special application, the splitter function configures the unit as a 4-channel stereo splitter. Here, the
stereo signal source is connected to the two main inputs. If all mono channels are operated in SPLIT mode, the
BALANCE controls of channels 1, 3, and 5 are set to “LEFT”, and the BALANCE controls of channels 2, 4, and
6 to “RIGHT”: thus, the corresponding stereo output pairs are routed through channels 1+2, 3+4, and 5+6. This
kind of application is particularly useful for tape duplication systems.
6. APPLICATIONS
13
ULTRALINK PRO MX882
6.3 Application as a matching amplifier
Fig. 6.3: Block diagram of the MATCHING AMPLIFIER function
The BEHRINGER ULTRALINK PRO can also be used as a multiple matching amplifier. The task of a matching
amplifier is to convert the level of a signal source into another level. For instance, a cassette recorder with
home recording level (-10 dBV) can be raised to studio level (+4 dBu). Of course, this process can also be
reversed (level attenuation).
In this application, the ULTRALINK PRO is operated in MIX mode. The output of the signal source is connected
to the mono input of the ULTRALINK PRO. The corresponding mono output provides the resulting output signal
which can be raised or lowered in level. Each of the six mono channels is equipped with a LEVEL control. The
control range is from -oo(full attenuation) to a maximum gain of +15 dB.
14
6. APPLICATIONS
ULTRALINK PRO MX882
7. SPECIFICATIONS
AUDIO INPUTS
Connectors
Type
Impedance
Nominal operating level
Max. input level
CMRR
XLR and 1/4" TRS
RF filtered, servo-balanced input
50 kOhms balanced, 25 kOhms unbalanced
-10 dBV to +4 dBu
+21 dBu balanced and unbalanced
Typ. 40 dB, > 55 dB @ 1 kHz
AUDIO OUTPUTS
Connectors
Type
Impedance
Max. output level
XLR and 1/4" TRS
Electronically servo-balanced output stage
60 Ohms balanced, 30 Ohms unbalanced
+22 dBu balanced and unbalanced
SYSTEM SPECIFICATIONS
Frequency response
S/N ratio
THD
5 Hz to 200 kHz, +/- 3 dB
>95 dBu, unweighted, 22 Hz to 22 kHz
0.002 % typ. @ +4 dBu, 1kHz, gain 1
FUNCTION CONTROLS
Main input level
Main ouput level
Level
variable
variable
variable for each channel
placing in the stereo field
Balance/pan
FUNCTION SWITCHES
Main Link
Split/mix
links the main input signal to the main output
changeover from split to mix mode for each channel
INDICATORS
Input level (main)
Ouput level (main)
Input/output level
4-digit LED display: -24/-12/0/+6 dB
4-digit LED display: -24/-12/0/+6 dB
8-digit LED display: -24/-18/-12/-6/0/+6/+12/+18 dB
POWER SUPPLY
Mains Voltages
USA/Canada
U.K./Australia
Europe
120 V ~, 60 Hz
240 V ~, 50 Hz
230 V ~, 50 Hz
General Export Model
max. 35 Watts
100 - 120 V ~: T 630 mA H
200 - 240 V ~: T 315 mA H
Standard IEC receptacle
100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz
Power Consumption
Fuse
Mains Connection
PHYSICAL/WEIGHT
Dimensions (H * W * D)
Net Weight
approx. 1 3/4" (44.5 mm) * 19" (482.6 mm) * 8 1/2" (217 mm)
approx. 3 kg
Shipping Weight
approx. 3.8 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be
made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or
shown.
7. SPECIFICATIONS
15
ULTRALINK PRO MX882
8. WARRANTY
§ 1 WARRANTY CARD/ONLINE REGISTRATION
To be protected by the extended warranty, the buyer must com-
plete and return the enclosed warranty card within 14 days of
the date of purchase to BEHRINGER Spezielle Studiotechnik
GmbH, in accordance with the conditions stipulated in § 3. Fail-
ure to return the card in due time (date as per postmark) will void
any extended warranty claims.
3. Free inspections and maintenance/repair work are expressly
excluded from this warranty, in particular, if caused by improper
handling of the product by the user.
This also applies to defects caused by normal wear and tear, in
particular, of faders, potentiometers, keys/buttons and similar
parts.
Based on the conditions herein, the buyer may also choose to
use the online registration option via the Internet
4. Damages/defects caused by the following conditions are not
covered by this warranty:
s misuse, neglect or failure to operate the unit in compliance
with the instructions given in BEHRINGER user or service
manuals.
§ 2 WARRANTY
1. BEHRINGER (BEHRINGER Spezielle Studiotechnik GmbH in-
cluding all BEHRINGER subsidiaries listed on the enclosed page,
except BEHRINGER Japan) warrants the mechanical and elec-
tronic components of this product to be free of defects in mate-
rial and workmanship for a period of one (1) year from the
original date of purchase, in accordance with the warranty regu-
lations described below. If the product shows any defects within
the specified warranty period that are not due to normal wear
and tear and/or improper handling by the user, BEHRINGER shall,
at its sole discretion, either repair or replace the product.
s connection or operation of the unit in any way that does not
comply with the technical or safety regulations applicable in
the country where the product is used.
s damages/defects caused by force majeure or any other
condition that is beyond the control of BEHRINGER.
5. Any repair or opening of the unit carried out by unauthorized
personnel (user included) will void the warranty.
6. If an inspection of the product by BEHRINGER shows that the
defect in question is not covered by the warranty, the inspection
costs are payable by the customer.
2. If the warranty claim proves to be justified, the product will be
returned to the user freight prepaid.
3. Warranty claims other than those indicated above are ex-
pressly excluded.
7. Products which do not meet the terms of this warranty will be
repaired exclusively at the buyer’s expense. BEHRINGER will
inform the buyer of any such circumstance. If the buyer fails to
submit a written repair order within 6 weeks after notification,
BEHRINGER will return the unit C.O.D. with a separate invoice
for freight and packing. Such costs will also be invoiced sepa-
rately when the buyer has sent in a written repair order.
§ 3 RETURN AUTHORIZATION NUMBER
1. To obtain warranty service, the buyer (or his authorized dealer)
must call BEHRINGER (see enclosed list) during normal business
hours BEFORE returning the product. All inquiries must be ac-
companied by a description of the problem. BEHRINGER will then
issue a return authorization number.
§ 5 WARRANTY TRANSFERABILITY
2. Subsequently, the product must be returned in its original
shipping carton, together with the return authorization number to
the address indicated by BEHRINGER.
This warranty is extended exclusively to the original buyer (cus-
tomer of retail dealer) and is not transferable to anyone who
may subsequently purchase this product. No other person (re-
tail dealer, etc.) shall be entitled to give any warranty promise on
behalf of BEHRINGER.
3. Shipments without freight prepaid will not be accepted.
§ 4 WARRANTY REGULATIONS
§ 6 CLAIM FOR DAMAGES
1. Warranty services will be furnished only if the product is
accompanied by a copy of the original retail dealer’s invoice.
Any product deemed eligible for repair or replacement by
BEHRINGER under the terms of this warranty will be repaired or
replaced within 30 days of receipt of the product at BEHRINGER.
Failure of BEHRINGER to provide proper warranty service shall
not entitle the buyer to claim (consequential) damages. In no
event shall the liability of BEHRINGER exceed the invoiced value
of the product.
§ 7 OTHER WARRANTY RIGHTS AND NATIONAL LAW
2. If the product needs to be modified or adapted in order to
comply with applicable technical or safety standards on a na-
tional or local level, in any country which is not the country for
which the product was originally developed and manufactured,
this modification/adaptation shall not be considered a defect in
materials or workmanship. The warranty does not cover any
such modification/adaptation, irrespective of whether it was
carried out properly or not. Under the terms of this warranty,
BEHRINGER shall not be held responsible for any cost resulting
from such a modification/adaptation.
1. This warranty does not exclude or limit the buyer’s statutory
rights provided by national law, in particular, any such rights
against the seller that arise from a legally effective purchase
contract.
2. The warranty regulations mentioned herein are applicable
unless they constitute an infringement of national warranty law.
The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or
transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any
purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER is a registered trademark.ALL RIGHTS RESERVED.
© 2001 BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany
Tel. +49 (0) 21 54 / 92 06-0, Fax +49 (0) 21 54 / 92 06-30
8. WARRANTY
16
|